What Is a Permanent Magnet Synchronous Motor (PMSM)? A Practical Guide

Nov 10, 2026

Leave a message

JH Wang
JH Wang
Chief Engineer and General Manager of the Technical Department of Hangzhou Jiangnan Electric Motor Co., Ltd

What Is a Permanent Magnet Synchronous Motor (PMSM)?

A Practical Guide for Industrial Applications

Permanent magnet synchronous motors, commonly known as PMSMs, are increasingly used in industrial equipment where energy efficiency, compact size and variable-speed operation are important.

Compared with a conventional induction motor, a PMSM uses permanent magnets to create the rotor magnetic field. The rotor operates in synchronization with the rotating magnetic field produced by the stator, which is where the term "synchronous motor" comes from.

For equipment manufacturers and industrial users, the main question is not simply whether PMSM technology is better than another motor technology. The more useful question is whether it is suitable for the operating conditions of a particular machine.

How Does a PMSM Work?

A PMSM has two main parts: the stator and the rotor. The stator contains the windings that produce a rotating magnetic field, while permanent magnets in or on the rotor provide the rotor magnetic field.

During operation, the rotor follows the rotating stator field at synchronous speed. In many industrial applications, PMSMs are operated together with a compatible variable-frequency drive (VFD) or motor controller. The drive regulates motor speed and torque according to the requirements of the equipment.

This combination makes PMSM technology particularly useful in applications where operating speed or load changes during production. The final control performance depends not only on the motor itself, but also on the drive, feedback method and control strategy used in the system.

Why Are PMSMs Used in Industrial Equipment?

High Efficiency

One of the main reasons manufacturers consider PMSMs is energy efficiency. Because the rotor magnetic field is produced by permanent magnets, the motor does not require the same rotor magnetizing current used in a conventional induction motor. This can help reduce motor losses and improve efficiency.

The actual energy saving of a complete drive system, however, depends on the motor, drive, load profile, operating speed and working hours. For equipment that operates for long periods or frequently runs at partial load, these factors can have a significant impact on operating cost.

High Power and Torque Density

PMSMs can provide relatively high output from a compact motor structure. This can be valuable when machine designers are working with limited installation space or when reducing motor size and weight is important. The exact advantage depends on the motor design, cooling method, rated speed and required torque.

Suitable for Variable-Speed Operation

Many pumps, fans, textile machines and industrial production systems do not need to operate at one fixed speed all the time. When combined with a suitable drive, a PMSM can operate across a controlled speed range according to the actual demand of the equipment.

This makes PMSM technology particularly relevant to applications where load conditions change during operation.

Reduced Rotor Losses

Unlike an induction motor, a PMSM does not rely on induced rotor current to generate its primary rotor magnetic field. This helps reduce rotor electrical losses and can also reduce heat generation in the rotor. For continuous-duty industrial applications, thermal performance can be an important consideration when evaluating motor efficiency and service life.

Where Are PMSMs Commonly Used?

PMSMs can be used in a wide range of industrial applications. The correct motor configuration depends on the actual load, speed range, installation space and working environment.

• Fans and ventilation systems, where variable-speed operation can allow motor output to follow actual airflow requirements.

• Textile machinery, where stable continuous operation and energy consumption are important considerations.

• Pumps and circulation systems that operate under changing flow or pressure requirements.

• Industrial production equipment requiring a compact motor with controlled speed and torque.

• Direct-drive and space-limited equipment where motor size, torque density and mechanical integration are important.

A motor designed for a fan, for example, may have very different speed, torque and cooling requirements from one used in textile machinery or a direct-drive industrial system. Application data should therefore be reviewed before a motor is selected.

PMSM or Induction Motor?

There is no single motor technology that is the best choice for every application. Induction motors remain widely used because they are mature, robust and suitable for many general industrial duties.

PMSMs become particularly attractive when customers are looking for higher system efficiency, compact motor dimensions, variable-speed operation or a specific torque and speed combination. The final decision should therefore be based on the complete operating requirements rather than motor efficiency alone.

Factor

PMSM

Induction Motor

Efficiency potential

Typically strong, especially in properly matched variable-speed systems

Mature and widely used; efficiency depends on design and operating point

Variable-speed operation

Commonly paired with a compatible VFD or controller

Also widely used with VFDs

Rotor magnetic field

Provided by permanent magnets

Produced by induced rotor current

Motor size / power density

Can be advantageous for compact designs

Depends strongly on frame, cooling and design

Best choice

Depends on application, load profile and total system requirements

Depends on application, cost, duty and system requirements

What Information Is Needed When Selecting a PMSM?

Selecting a motor only according to rated power is rarely sufficient. Before recommending a PMSM, Jiangnan Electric normally needs to understand the actual operating conditions of the customer's equipment.

• Rated power and rated speed

• Required torque and load characteristics

• Supply voltage and frequency

• Required operating speed range

• Duty cycle and operating hours

• Installation dimensions and mounting method

• Ambient temperature and cooling conditions

• Required protection level

• Existing VFD, controller or system interface requirements, where applicable

If an existing motor is being replaced, a nameplate photo, technical drawing or motor specification can make the selection process considerably more efficient.

Jiangnan Electric PMSM Solutions

Hangzhou Jiangnan Electric Motor Co., Ltd. develops and manufactures motors for industrial equipment and smart-home applications. Its permanent magnet motor portfolio includes industrial PMSM solutions in different power and operating ranges, together with axial-flux motor technology for applications where compact structure and power density are important.

Current product solutions include 7.5 kW, 15 kW, 30 kW and 45 kW PMSM configurations, as well as motors developed for applications such as textile machinery and other industrial equipment.

Rather than selecting a motor only from a standard power rating, Jiangnan Electric's engineering team evaluates the required speed, torque, voltage, installation space and operating conditions before recommending a suitable configuration. For OEM projects, motor parameters and mechanical interfaces can also be discussed according to the requirements of the equipment.

Choosing the Right Motor Starts with the Application

A PMSM can provide important advantages in the right application, but the motor should always be selected as part of the complete drive system. Power rating is only the starting point.

Understanding how the equipment actually operates - including its speed range, load curve, working environment and installation requirements - is the most reliable way to determine whether a permanent magnet synchronous motor is the right solution.

If you are evaluating a PMSM for a new machine or replacing an existing motor, send Jiangnan Electric your motor specifications, nameplate information or technical drawing. Our engineering team can review the application and help identify an appropriate motor solution.

Hangzhou Jiangnan Electric Motor Co., Ltd.
Website: www.jnelectricmotor.com
Email: sales@jnelectricmotor.com

Disclaimer

The information in this article is provided for general reference only. Product specifications, performance, configuration options and suitability must be evaluated in detail for the intended application and actual operating conditions. Before selecting, purchasing or using a product, please confirm the relevant details with Jiangnan Electric and refer to the applicable technical documentation and agreed specifications. This article does not replace product-specific instructions or a professional engineering assessment.

Send Inquiry